Publications

Journal and conference publications from the UCPD research group

Journal publications

  1. Rhén, I.M., Forsman, M., Örtengren, R., Högberg, D., Keyvani, A., Lämkull, D. and Hanson, L. (2017). Ergonomic Risk Assessment in DHM tools Employing Motion Data – Exposure Calculation and Comparison to Epidemiological Reference Data. International Journal of Human Factors Modelling and Simulation. Accepted for publication.
  2. Brolin, E., Högberg, D., Hanson, L. and Örtengren, R. (2017). Adaptive regression model for prediction of anthropometric data. International Journal of Human Factors Modelling and Simulation, Vol. 5(4), 285-305.
  3. Brolin, A., Thorvald, P. and Case, K. (2017). Experimental study of cognitive aspects affecting human performance in manual assembly. Production & Manufacturing Research, Vol. 5(1), 141-163. doi: 10.1080/21693277.2017.1374893.
  4. Andreasson, R., Lindblom, J. and Thorvald, P. (2017). Tool use and collaborative work of dock assembly in practice. Production & Manufacturing Research, Vol. 5(1), 164-190. doi: 10.1080/21693277.2017.1374890.
  5. Lindblom, J. and Thorvald, P. (2017). Manufacturing in the wild - Viewing human based assembly through the lens of distributed cognition. Production & Manufacturing Research, Vol. 5(1), 57-80. doi: 10.1080/21693277.2017.1322540.
  6. Brolin, E., Högberg, D., Hanson, L. and Örtengren, R. (2017). Adaptive regression model for synthesizing anthropometric population data. International Journal of Industrial Ergonomics, Vol. 59, 46-53.
  7. Kolbeinsson, A., Thorvald, P. and Lindblom, J. (2017). Coordinating the interruption of assembly workers in manufacturing. Applied Ergonomics, Vol. 58, 361-371.
  8. Kolbeinsson, A., Lindblom, J. and Thorvald, P. (2017). Missing mediated interruptions in manual assembly: Critical aspects of breakpoint selection. Applied Ergonomics, Vol. 61, 90-101.
  9. Andreasson, R., Lindblom, J. and Thorvald, P. (2017) Interruptions in the wild: portraying the handling of interruptions in manufacturing from a distributed cognition lens. Cognition, Technology & Work, Vol. 19(1), 85-108.
  10. Brolin, E., Högberg, D., Hanson, L. and Örtengren, R. (2017). Development and Evaluation of an Anthropometric Module for Digital Human Modelling Systems. Submitted to International Journal of Industrial Ergonomics. Under review.
  11. Ore, F., Vemula, B.R., Hanson, L., and Wiktorsson, M. (2016). Human - Industrial Robot Collaboration: Application of Simulation Software for Workstation Optimisation. Procedia CIRP, Vol. 44. 181-186.
  12. Mattsson, S., Fast-Berglund, Å. and Thorvald, P. (2016). A Relationship Between Operator Performance and Arousal in Assembly. Procedia CIRP, Vol. 44, 32-37.
  13. Brolin, E., Högberg, D., Hanson, L. and Örtengren, R. (2016). Generation and Evaluation of Distributed Cases by Clustering of Diverse Anthropometric Data. International Journal of Human Factors Modelling and Simulation, Vol 5(3), 210-229.
  14. Högberg, D., Hanson, L., Bohlin, R. and Carlson, J.S. (2016). Creating and shaping the DHM tool IMMA for ergonomic product and production design. International Journal of Digital Human, Vol. 1(2), 132-152.
  15. Ore, F., Hanson, L., Delfs, N. and Wiktorsson, M. (2015). Human industrial robot collaboration - development and application of simulation software. International Journal of Human Factors Modelling and Simulation, Vol. 5(2), 164-185.
  16. Kolbeinsson, A., Falkman, G. and Lindblom, J. (2015). Showing uncertainty in aircraft cockpits using icons. Procedia Manufacturing, Vol. 3, 2905-2912.
  17. Kolbeinsson, A. and Lindblom, J. (2015). Mind the body: How embodied cognition matters in manufacturing. Procedia Manufacturing, Vol. 3, 5184-5191.
  18. Thorvald, P., Lindblom, J. and Schmitz, S. (2015). Modified pluralistic walkthrough for method evaluation in manufacturing. Procedia Manufacturing, Vol. 3, 5139-5146.
  19. Andreasson, R., Lindblom, J. and Thorvald, P. (2015). Towards an increased degree of usability work in organizations. Procedia Manufacturing, Vol. 3, 5739-5746.
  20. Högberg, D., Brolin, E. and Hanson, L. (2015). Accommodation levels for ellipsoid versus cuboid defined boundary cases. Procedia Manufacturing, Vol. 3, 3702-3708.
  21. Bergman, C., Castro, P.M., Högberg, D. and Hanson, L. (2015). Implementation of Suitable Comfort Model for Posture and Motion Prediction in DHM Supported Vehicle Design. Procedia Manufacturing, Vol. 3, 3753-3758.
  22. Mårdberg, P., Carlson, J.S., Bohlin, R., Delfs, N., Gustafsson, S., Högberg, D. and Hanson, L. (2014). Using a Formal High-Level Language and Automated Manikin to Automatically Generate Assembly Instructions. International Journal of Human Factors Modelling and Simulation, Vol. 4, No. 3/4, 233-249.
  23. Thorvald, P., Högberg, D. and Case, K. (2014). The Effect of Information Mobility on Production Quality. International Journal of Computer Integrated Manufacturing, Volume 27(2), 120-128.
  24. Hanson, R. and Brolin, A. (2013). A comparison of kitting and continuous supply in in-plant materials supply. International Journal of Production Research, Vol. 51(4), 979-992.
  25. Brolin, E., Högberg, D. and Hanson, L. (2012). Description of boundary case methodology for anthropometric diversity consideration. International Journal of Human Factors Modelling and Simulation, Vol. 3(2), 204-223.
  26. Thorvald, P., Högberg, D. and Case, K. (2012). Applying Cognitive Science to Digital Human Modelling for User Centred Design. International Journal of Human Factors Modelling and Simulation, Vol. 3(1), 90-106.
  27. Bertilsson, E., Högberg, D. and Hanson, L. (2012). Using experimental design to define boundary manikins. Work: A Journal of Prevention, Assessment and Rehabilitation, Vol. 41, Suppl.1, 4598-4605.
  28. Hanson, L., Högberg, D. and Söderholm, M. (2012). Digital test assembly of truck parts with the IMMA-tool. Work: A Journal of Prevention, Assessment and Rehabilitation, Vol. 41, Suppl.1, 2248-2252.
  29. Falck, A., Örtengren, R. and Högberg, D. (2010). The Impact of Poor Assembly Ergonomics on Product Quality: A Cost–Benefit Analysis in Car Manufacturing. Human Factors and Ergonomics in Manufacturing & Service Industries, Vol. 20(1), 24-41.
  30. Högberg, D. (2009). Digital human modelling for user-centred vehicle design and anthropometric analysis. International Journal of Vehicle Design, Vol. 51(3/4), 306-323.
  31. Rexfelt, O. and Hiort af Ornäs, V. (2009). Consumer acceptance of product-service systems - Designing for relative advantages and uncertainty reductions. Journal of Manufacturing Technology Management, Vol. 20(5), 674-699.
  32. Högberg, D., Bäckstrand, G., Lämkull, D., Hanson, L. and Örtengren, R. (2008). Industrial customisation of digital human modelling tools. International Journal of Services Operations and Informatics, Vol. 3(1), 53-70.
  33. Bäckstrand, G., Högberg, D., De Vin, L.J., Case, K. and Piamonte, P. (2007). Ergonomics Analysis In A Virtual Environment. International Journal of Manufacturing Research, 2007, Vol 2(2), 198-208.
  34. Hanson, L., Blomé, M., Dukic, T. and Högberg, D. (2006). Guide and documentation system to support digital human modeling applications. International Journal of Industrial Ergonomics, Vol 36(1), 17-24.
  35. Högberg, D. (2001). Use of Finite Element Method in Trailer Deck Design. Journal of Materials Processing Technology, Vol. 117(1,) 238-243, ISSN 0924-0136.

Full paper publications in peer reviewed conference proceedings and associated books

  1. Högberg, D., Brolin, E. and Hanson, L. (2018). Concept of Formalized Test Procedure for Proactive Assessment of Ergonomic Value by Digital Human Modelling Tools in Lean Product Development. Advances in Human Factors in Simulation and Modeling. Cassenti, D.N. (Ed.). AHFE Conference, pp. 425-436, ISBN 978-3-319-60590-6.
  2. Thorvald, P., Lindblom, J. & Andreasson, R. (2017). CLAM – A method for cognitive load assessment in manufacturing. Advances in Manufacturing Technology XXXI. pp. 114-119. IOS Press. (Advances in Transdisciplinary Engineering series).
  3. Brolin, E., Högberg, D., Hanson, L. and Björkenstam, S. (2017). Virtual test persons based on diverse anthropometric data for ergonomics simulations and analysis. Proceedings of the NES 2017 Conference "Joy at Work", August 2017, Lund University, ISBN 978-91-7753-152-4.
  4. Ruiz Castro, P., Mahdavian, N., Högberg, D., Ore, F., Brolin, E. and Hanson, L. (2017). IPS IMMA for designing human-robot collaboration workstations. In proceedings of DHM 2017, Fifth International Digital Human Modeling Symposium, Bonn, Germany, June 2017. DOI: 10.21934/baua:bericht20170816 (link)
  5. Mahdavian, N., Ruiz Castro, P., Högberg, D., Brolin, E. and Hanson, L. (2017). Digital human modelling in a virtual environment of CAD parts and a point cloud. In proceedings of DHM 2017, Fifth International Digital Human Modeling Symposium, Bonn, Germany, June 2017. DOI: 10.21934/baua:bericht20170816 (link)
  6. Björkenstam, S., Carlson, J.S., Nyström, J., Roller, M., Linn, J., Hanson, L., Högberg, D. and Leyendecker, S. (2017). A framework for motion planning of digital humans using discrete mechanics and optimal control. In proceedings of DHM 2017, Fifth International Digital Human Modeling Symposium, Bonn, Germany, June 2017. DOI: 10.21934/baua:bericht20170816 (link)
  7. Brolin, A., Case, K. and Thorvald, P. (2016). Cognitive Aspects Affecting Human Performance in Manual Assembly. Advances in Manufacturing Technology XXX, pp. 231-236. IOS Press. ISBN print
    978-1-61499-667-5.
  8. Andreasson, R., Lindblom, J. and Thorvald, P. (2016). Distributed Cognition in Manufacturing:Collaborative Assembly Work. Advances in Manufacturing Technology XXX, pp. 243-248. IOS Press. ISBN print
    978-1-61499-667-5.
  9. Thorvald, P. and Lindblom, J. (2015). Distributed cognition at work - A systemic perspective on human based manufacturing. Proceedings of 13th International Conference on Manufacturing Research (ICMR2015), pp.195-200. University of Bath, Bath, UK.
  10. Högberg, D., Brolin, E. and Hanson, L. (2015). Identification of redundant boundary cases. Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Lindgaard, G. and Moore, D. (Eds.), Melbourne, Australia, 9-14 August, 2015.
  11. Li, C., Bredies, K., Lund, A., Nierstrasz, V., Hemeren, P. and Högberg, D. (2015). k-Nearest-Neighbour based Numerical Hand Posture Recognition using a Smart Textile Glove. Proceedings of the Fifth International Conference on Ambient Computing, Applications, Services and Technologies, AMBIENT 2015, Nice, France, 19-24 July, 2015. ISBN 978-1-61208-421-3.
  12. Thorvald, P. and Lindblom, J. (2014). Initial development of a cognitive load assessment tool. Advances in Cognitive Engineering and Neuroergonomics. Stanney, K. & Hale, K.S (Eds.). AHFE Conference, pp. 223-232.
  13. Lindblom, J. and Thorvald, P. (2014). Towards a framework for reducing cognitive load in manufacturing personnel. Advances in Cognitive Engineering and Neuroergonomics. Stanney, K. & Hale, K.S (Eds.). AHFE Conference, pp. 233-244.
  14. Kolbeinsson, A., Thorvald, P. and Lindblom, J. (2014). Context aware interruptions: Existing research and required research. Advances in Cognitive Engineering and Neuroergonomics. Stanney, K. & Hale, K.S (Eds.). AHFE Conference, pp. 260-272.
  15. Bergman, C., Högberg, D., Bäckstrand, G. and Moestam, L. (2014). A Library Based Tool to Assist the Generative Activity in Workstation Design. Advances in Ergonomics in Design, Usability & Special Populations, Part II. Rebelo, F. and Soares, M. (Eds.). AHFE Conference, pp. 206-214, ISBN 978-1-4951-2107-4.
  16. Högberg, D., Brolin, E. and Hanson, L. (2014). Basic Method for Handling Trivariate Normal Distributions in Case Definition for Design and Human Simulation. Advances in Applied Digital Human Modeling. Duffy, V.G. (Ed.). AHFE Conference, pp. 27-40, ISBN 978-1-4951-2094-7.
  17. Brolin, E., Högberg, D. and Hanson, L. (2014). Design of a Digital Human Modelling Module for Consideration of Anthropometric Diversity. Advances in Applied Digital Human Modeling. Duffy, V.G. (Ed.). AHFE Conference, pp. 114-120, ISBN 978-1-4951-2094-7.
  18. Brolin, E., Hanson, L. and Högberg, D. (2014). Digital human arm models with variation in size, strength and range of motion. Proceedings of DHM 2014, Third International Digital Human Modeling Symposium, Japan, May 2014.
  19. Delfs, N., Bohlin, R., Hanson, L., Högberg, D. and Carlson, J.S. (2013). Introducing Stability Of Forces To The Automatic Creation Of Digital Human Postures. Proceedings of DHM 2013, Second International Digital Human Modeling Symposium, USA, June 2013.
  20. Brolin, E., Hanson, L., Högberg, D. and Örtengren, R. (2013). Conditional Regression Model for Prediction of Anthropometric Variables. Proceedings of DHM 2013, Second International Digital Human Modeling Symposium, USA, June 2013.
  21. Keyvani, A., Högberg, D., Hanson, L., Lämkull, D., Delfs, N., Rhen, I.M. and Örtengren, R. (2013). Ergonomics risk assessment of a manikin’s wrist movements – a test study in manual assembly. Proceedings of DHM 2013, Second International Digital Human Modeling Symposium, USA, June 2013.
  22. Bergman, C., Bäckstrand, G., Högberg, D. and Moestam, L. (2013). A tool to assist and evaluate workstation design. Proceedings of NES 2013, 45th Nordic Ergonomics & Human Factors Society conference, Iceland, August 2013. ISBN 978-9979-72-397-4.
  23. Bäckstrand, G., Bergman, C., Högberg, D. and Moestam, L. (2013). Lean and its impact on workstation design. Proceedings of NES 2013, 45th Nordic Ergonomics & Human Factors Society conference, Iceland, August 2013. ISBN 978-9979-72-397-4.
  24. Thorvald, P. (2013). Comparing the use of article numbers to alternate information syntaxes. Proceedings of NES 2013, 45th Nordic Ergonomics & Human Factors Society conference, Iceland, August 2013. ISBN 978-9979-72-397-4.
  25. Harlin, U., Gullander, P., Bäckstrand, G., Thorvald, P. and Moestam, L. (2013). Flexible balancing of assembly systems and its impact on performance and human factors – a scenario-based analysis. Proceedings of NES 2013, 45th Nordic Ergonomics & Human Factors Society conference, Iceland, August 2013. ISBN 978-9979-72-397-4.
  26. Högberg, D., Bertilsson, E. and Hanson, L. (2012). A pragmatic approach to define anthropometric boundary manikins for multiple populations. Proceeding of the 44th annual Nordic Ergonomics Society Conference, NES2012, Ergonomics for sustainability and growth, August 2012, Antonsson, A-B. and Hägg, G.M. (Eds.), KTH Royal Institute of Technology, Sweden. ISBN 978-91-637-1150-3.
  27. Bertilsson, E., Keyvani, A., Högberg, D. and Hanson, L. (2012). Assessment of manikin motions in IMMA. Advances in Applied Human Modeling and Simulation. Duffy, V.G. (Ed.). CRC Press. pp. 235–244, ISBN 978-1-4398-7031-0 (print), ISBN 978-1-4398-7032-7 (eBook).
  28. Rhen, I.M., Högberg, D., Hanson, L. and Bertilsson, E. (2012). Dynamic wrist exposure analysis of a digital human model. Proceedings of the 4th International Conference on Applied Human Factors and Ergonomics (AHFE), USA, July 2012, pp. 3944-3953, ISBN 0-9796435-5-4.
  29. Brolin, A., Bäckstrand, G., Thorvald, P., Högberg, D. and Case, K. (2012). Kitting as an information source in manual assembly. Advances in Ergonomics in Manufacturing. Karwowski, W. (Ed.). CRC Press. pp. 346–353, ISBN 978-1-4398-7039-6 (print), ISBN 978-1-4398-7040-2 (eBook).
  30. Mårdberg, P., Carlson, J.S., Bohlin, R., Hanson, L. and Högberg, D. (2012). Using Ergonomic Criteria to Adaptively Define Test Manikins for Design Problems. Advances in Applied Human Modeling and Simulation. Duffy, V.G. (Ed.). CRC Press. pp. 265–274, ISBN 978-1-4398-7031-0 (print), ISBN 978-1-4398-7032-7 (eBook).
  31. Thorvald, P., Bäckstrand, G., Högberg, D. and Case, K. (2012). Syntax and Sequencing of Assembly Instructions. Advances in Usability Evaluation Part II. Rebelo, F. and Soares, M.M. (Eds.). CRC Press. ISBN 978-1-46-656054-3.
  32. Bohlin, R., Delfs, N., Hanson L., Högberg, D. and Carlson, J.S. (2012). Automatic Creation of Virtual Manikin Motions Maximizing Comfort in Manual Assembly Processes. Proceedings of the 4th CIRP Conference On Assembly Technologies And Systems, Hu, S.J. (Ed.), USA, May 2012, pp. 209-212. ISBN 978-0-615-64022-8.
  33. Bertilsson, E., Hanson, L., Högberg, D. and Rhen, I.M. (2011). Creation of the IMMA manikin with consideration of anthropometric diversity. Proceedings of the 21st International Conference on Production Research (ICPR), Stuttgart, Germany, August 2011, ISBN: 978-3-8396-0293-5.
  34. Harlin, U., Bäckstrand, G., Fässberg, T., Brolin, A., Gullander, P. (2011). Production complexity and its impact on manning. Proceedings of the 28th International Manufacturing Conference (IMC 28), Dublin, Ireland, August 2011.
  35. Brolin, A., Bäckstrand, G., Högberg, D. and Case, K. (2011). Inadequate presented information and its effect on the cognitive workload. Proceedings of the 28th International Manufacturing Conference (IMC 28), Dublin, Ireland, August 2011.
  36. Brolin, A., Bäckstrand, G., Högberg, D. and Case, K. (2011). The use of kitting to ease assemblers’ cognitive workload. Proceedings of the 43rd annual Nordic Ergonomics Society Conference, Oulu, Finland, September 2011, ISBN 978-951-42-9541-6.
  37. Bertilsson, E., Gustafsson, E., Hanson, L. and Högberg, D. (2011). Swedish Engineering Anthropometric Web Resource. Proceedings of the 43rd annual Nordic Ergonomics Society Conference, Oulu, Finland, September 2011, ISBN 978-951-42-9541-6.
  38. Rhen, I.M., Hanson, L. and Högberg, D. (2011). Risk exposure assessment of dynamic wrist motions of a digital human model. Proceedings of the 43rd annual Nordic Ergonomics Society Conference, Oulu, Finland, September 2011, ISBN 978-951-42-9541-6.
  39. Hanson, R., Brolin, A. (2011). A comparison of kitting and continuous supply in in-plant materials supply. Proceedings of SPS 2011, Swedish Production Symposium, Sweden, Lund, May, 2011.
  40. Bertilsson, E., Högberg, D., Hanson, L. and Wondmagegne, Y. (2011). Multidimensional consideration of anthropometric diversity. Proceedings of DHM 2011, First International Symposium on Digital Human Modeling, France, June 2011, ISBN 978-2-9539515-0-9.
  41. Rhen, I.M., Gyllensvärd, D., Hanson, L. and Högberg, D. (2011). Time dependent exposure analysis and risk assessment of a manikin’s wrist movements. Proceedings of DHM 2011, First International Symposium on Digital Human Modeling, France, June 2011, ISBN 978-2-9539515-0-9.
  42. Bohlin, R., Delfs, N., Hanson L., Högberg, D. and Carlson, J.S. (2011). Unified solution of manikin physics and positioning. Exterior root by introduction of extra parameters. Proceedings of DHM 2011, First International Symposium on Digital Human Modeling, France, June 2011, ISBN 978-2-9539515-0-9.
  43. Högberg, D., Bertilsson, E. and Hanson, L. (2011). A basic step towards increased accommodation level accuracy when using DHM tools. Proceedings of DHM 2011, First International Symposium on Digital Human Modeling, Lyon, France, June 2011, ISBN 978-2-9539515-0-9.
  44. Hanson, L., Högberg, D., Bohlin, R. and Carlson, J.S. (2011). IMMA – Intelligently Moving Manikins – Project Status 2011. Proceedings of DHM 2011, First International Symposium on Digital Human Modeling, Lyon, France, June 2011, ISBN 978-2-9539515-0-9.
  45. Hanson, L., Högberg, D., Bohlin, R. and Carlson, J.S. (2010). IMMA – Intelligently Moving Manikin – Project Status. Advances in Applied Digital Human Modeling, Duffy, V.G. (Ed.), CRC Press, USA, ISBN 9781439835111.
  46. Bertilsson, E., Högberg, D. and Hanson, L. (2010). Digital Human Model Module and Work Process for Considering Anthropometric Diversity. Advances in Applied Digital Human Modeling, Duffy, V.G. (Ed.), CRC Press, USA, ISBN 9781439835111.
  47. Svensson, E., Bertilsson, E., Högberg, D. and Hanson, L. (2010). Anthropometrics and Ergonomics Assessment in the IMMA manikin. Advances in Applied Digital Human Modeling, Duffy, V.G. (Ed.), CRC Press, USA, ISBN 9781439835111.
  48. Hiort af Ornäs, V. (2010). Significant Things & Significant Use: A self report study on objects of experiences with things. In Sato, Desmet, Hekkert, Ludden and Mathew (eds.) Proceedings of the 7th Design and Emotion Conference 2010, ISBN: 978-0-615-40666-4; IIT Institute of Design, Chicago, October 4-7 2010.
  49. Thorvald, P., Brolin, A., Högberg, D. and Case, K. (2010). Using Mobile Information Sources to Increase Productivity and Quality. Proceedings of 3rd Applied Human Factors and Ergonomics (AHFE) International Conference, Karwowski, W. and Salvendy, G. (Eds.), USA, July 2010, ISBN 978-0-9796435-4-5.
  50. Bäckstrand, G., Brolin, A., Högberg, D. and Case, K. (2010). Supporting Attention in Manual Assembly and its Influence on Quality. Proceedings of 3rd Applied Human Factors and Ergonomics (AHFE) International Conference, Karwowski, W. and Salvendy, G. (Eds.), USA, July 2010, ISBN 978-0-9796435-4-5.
  51. Svensson, E., Bertilsson, E., Högberg, D. and Hanson, L. (2010). Review of the incorporation, utilization and future demands of ergonomic evaluation methods in Digital Human Modelling. Proceedings of the 42nd annual Nordic Ergonomic Society Conference, Stavanger, Norway, September 2010, ISBN 978-82-995747-2-3.
  52. Bertilsson, E., Svensson, E., Högberg, D. and Hanson, L. (2010). Use of digital human modelling and consideration of anthropometric diversity in Swedish industry. Proceedings of the 42nd annual Nordic Ergonomic Society Conference, Stavanger, Norway, September 2010, ISBN 978-82-995747-2-3.
  53. Lundström, D., Case, K. and Högberg, D. (2010). Anthropometric rigging for variable manikin appearance. Proceedings of the 8th International Conference on Manufacturing Research (ICMR 2010), Durham University, UK, September 2010, pp. 250-255, ISBN 9781905866519.
  54. Hanson, L., Högberg, D., Lundström, D. and Wårell, M. (2009). Application of Human Modelling in Health Care Industry. HCII 2009 Proceedings, Digital Human Modeling, Duffy, V.G. (ed), Springer, Germany, July 2009, pp 521-530, LNCS 5620, ISBN 978-3-642-02808-3.
  55. Thorvald, P., Högberg, D. and Case, K. (2009). Incorporating Cognitive Aspects in Digital Human Modelling. HCII 2009 Proceedings, Digital Human Modeling, Duffy, V.G. (ed), Springer, Germany, July 2009, pp 323-332, LNCS 5620, ISBN 978-3-642-02808-3.
  56. Case, K., Marshall, R., Högberg, D., Summerskill, S., Gyi, D. and Sims, R. (2009). HADRIAN: Fitting Trials by Digital Human Modelling. HCII 2009 Proceedings, Digital Human Modeling, Duffy, V.G. (ed), Springer, Germany, July 2009, pp. 673-680, LNCS 5620, ISBN 978-3-642-02808-3.
  57. Högberg, D., Lundström, D., Hanson, L. and Wårell, M. (2009). Increasing Functionality of DHM Software by Industry Specific Program Features. SAE Technical Paper 2009-01-2288.
  58. Falck, A., Örtengren, R. and Högberg, D. (2009). Early risk identification and cost-benefit analyses through ergonomics simulation. SAE Technical Paper 2009-01-2287.
  59. Hiort af Ornäs, V. (2009). Towards a Typology for Emotional Experiences with Things; Design Responsibility: Potentials and Pitfalls - 8th NORDCODE Seminar &Workshop; Designskolen Kolding, Kolding, May 27-29, 2009.
  60. Case, K., Bäckstrand, G., Högberg, D., Thorvald, P. and De Vin, L. (2008). An assembly line information system study. Proceedings of the 6th International Conference on Manufacturing Research (ICMR08), Brunel University, UK, 9-11th September 2008, pp. 181-188.
  61. Högberg, D., Hanson, L., Lundström, D., Jönsson, M. and Lämkull, D. (2008). Representing the elderly in digital human modelling. Proceedings of the 40th annual Nordic Ergonomic Society Conference, Reykjavik, Iceland, August 11-13, ISBN 978-9979-70-471-3.
  62. Bäckstrand, G., Thorvald, P., De Vin, L., Högberg, D. and Case, K. (2008). The impact of information presentation on work environment and product quality: a case study. Proceedings of the 40th annual Nordic Ergonomic Society Conference, Reykjavik, Iceland, August 11-13, ISBN 978-9979-70-471-3.
  63. Thorvald, P., Bäckstrand, G., Högberg, D., De Vin, L. and Case, K. (2008). Information presentation in manual assembly - a cognitive ergonomics analysis. Proceedings of the 40th annual Nordic Ergonomic Society Conference, Reykjavik, Iceland, August 11-13, ISBN 978-9979-70-471-3.
  64. Falck, A., Örtengren, R. and Högberg, D. (2008). The influence of assembly ergonomics on product quality in car manufacturing – a cost-benefit approach. Proceedings of the 40th annual Nordic Ergonomic Society Conference, Reykjavik, Iceland, August 11-13, ISBN 978-9979-70-471-3.
  65. Lundström, D., Hanson, L., Högberg, D. and Sundin, A. (2008). Visualization of Comfort and Reach in Cab Environment. Proceedings of the 40th annual Nordic Ergonomic Society Conference, Reykjavik, Iceland, August 11-13, ISBN 978-9979-70-471-3.
  66. Thorvald, P., Bäckstrand, G., Högberg, D., De Vin, L. and Case, K. (2008). Demands on technology from a human automatism perspective in manual assembly. Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2008, Skövde, Sweden, June 30 - July 2.
  67. Keitsch, M. and Hiort af Ornäs, V. (2008). Meaning and Interpretation: An analysis of two theoretical perspectives in product design. In: Desmet, PMA; Tzvetanova, SA; Hekkert, P; Justice, L. (Eds.). Proceedings from the 6th Conference on Design & Emotion 2008, School of Design, The Hong Kong Polytechnic University, 6-9 October 2008, Hong Kong SAR; ISBN: 978-988-17489-2-8.
  68. Rexfelt, O. & Hiort af Ornäs, V. (2008) From consumption to use - Consumer requirements in functional sales, In: Horváth, I & Rusák, Z (Eds.). Proceedings of the Seventh International Symposium on Tools and Methods of Competitive Engineering - TMCE 2008, April 21-25, Izmir, Turkey; ISBN: 978-90-5155-044-3., 978-90-5155-045-0.
  69. Högberg, D. and Case, K. (2007). Predefined manikins to support consideration of anthropometric diversity by product designers. HCII 2007 Proceedings, Digital Human Modeling, Duffy, V.G. (ed), Springer, Germany, July 2007, pp 110-119, LNCS 4561, ISBN 978-3-540-73318-8.
  70. Blomé, M., Hanson, L., Högberg, D., Jönsson, M., Lundström, D. and Lämkull, D. (2007). Visualisation of Human Characteristics in Vehicle and Health Care Product Development. Proceedings of the SIGRAD 2007 Conference, Uppsala, Sweden, November 29-30.
  71. Högberg, D., Bäckstrand, G., Lämkull, D., De Vin, L.J., Case, K., Örtengren, R., Hanson, L. and Berlin C. (2007). Towards Dynamic Ergonomics Analysis of Work Sequences in Virtual Environments. Proceedings of the 17th International Conference on Flexible Automation and Intelligent Manufacturing (2007 FAIM), Philadelphia, USA, June 2007, pp 581-588, ISBN 978-1-4276-2092-7.
  72. Persson, S., Hiort af Ornäs, V. and Jordan, P.W. (2007). Product constructs: Investigating differences between human factors specialists, industrial designers and engineers. Proceedings of the 39th annual Nordic Ergonomic Society Conference, Lysekil, Sweden, October 1-3, CD-ROM.
  73. Bäckstrand, G., Lämkull, D., Högberg, D., De Vin, L.J. and Case, K. (2007). Reduction of ergonomics design flaws through virtual methods. Proceedings of the 39th annual Nordic Ergonomic Society Conference, Lysekil, Sweden, October 1-3, CD-ROM.
  74. Bäckstrand, G., Högberg, D., De Vin, L.J., Case, K. and Piamonte, P. (2006). Ergonomics Analysis in a Virtual Environment. Proceedings of the International Manufacturing Conference, IMC 23, University of Ulster, Jordanstown, Ireland, August 2006.
  75. Högberg, D. and Case, K. (2006). Manikin Characters: User Characters in Human Computer Modelling. Contemporary Ergonomics , Bust, P.D. (ed), Taylor & Francis, UK, April 2006, pp 499-503, ISBN 0-415-39818-5.
  76. Bäckstrand, G., De Vin, L.J., Högberg, D. and Case, K. (2006). Attention, Interpreting, Decision-making and Acting in Manual Assembly. Proceedings of the International Manufacturing Conference, IMC 23, University of Ulster, Jordanstown, Ireland, August 2006.
  77. Hiort af Ornäs, V. and Rexfelt, O. (2006). Functional Sales From A Consumer Perspective. Wonderground - the 2006 Design Research Society International conference, Lisbon, Portugal, November 2006.
  78. Hiort af Ornäs, V. (2006). Feelings for products: Sensations, beliefs and emotions. Proceeding of the 5th Conference on Design and Emotion; Gothenburg, September 2006.
  79. Pilerot, O. and Hiort af Ornäs, V. (2006). Design for Information Literacy - Towards embedded information literacy education for product design engineering students. Creating Knowledge IV conference, Copenhagen, Denmark, August 2006.
  80. Högberg, D. and Case, K. (2005). The impact of manikin family configuration on accommodation. Proceedings of the 37th annual Nordic Ergonomic Society Conference, Oslo, Norway, October 10-12, pp 91-95, ISBN 82-995747-1-4.
  81. Bäckstrand, G., Möller, S., Högberg, D., Sundin, A., De Vin, L.J. and Case, K. (2005). A Roadmap towards Cost Calculation Methods Connected to Ergonomics Analysis and Simulation. Proceedings of the 37th annual Nordic Ergonomic Society Conference, Oslo, Norway, October 10-12, pp. 312, ISBN 82-995747-1-4.
  82. Bäckstrand, G., De Vin, L.J., Högberg, D. and Case, K. (2005). Parameters affecting quality in manual assembly of engines. Proceedings of the International Manufacturing Conference, IMC 22, Institute of Technology Tallaght, Dublin, Ireland, August 2005, pp 395-402.
  83. Janhager, J. and Högberg, D. (2004). Product Developers' Relation to Their Users - Interview Study. Proceedings of NordDesign 2004: Product Development in Changing Environment. Tampere, Finland, August 2004.
  84. Hiort af Ornäs, V. and Karlsson, M-A. (2004). Causes of Emotive Response to Artefacts. In CD-Proceedings of the 4th International Conference on Design and Emotion, Ankara, Turkey, July 2004.
  85. Blomé, M., Dukic, T., Hanson, L. and Högberg, D. (2003). Simulation of Human-Vehicle Interaction in Vehicle Design at Saab Automobile: Present and Future. SAE Technical Paper 2003-01-2192. SAE 2003 Transactions, Journal of Passenger Cars - Electronic and Electrical Systems.
  86. Blomé, M., Dukic, T., Hanson, L. and Högberg, D. (2003). Web-Based Protocol for Human Simulation Process and Documentation. The Europe Chapter Annual Meeting on Human Factors in Design, Lund, Sweden, October 2003.
  87. Högberg, D., Hanson, L. and Case, K. (2003). Computer Manikin Family Usage for Human Accomodation. Proceedings of the Nordic Ergonomics Society conference "Mind and Body in a Technological World", Reykavik, Iceland, August 2003, pp. 184-188, ISBN 9979-60-861-7.
  88. Blomé, M., Dukic, T., Hanson, L. and Högberg, D. (2003). Computer-Based Protocol for Human Simulation Report. Proceedings of IEA 2003 - the XVth Triennial Congress of the International Ergonomics Association, Seoul, Korea, August 2003, V.3, pp. 30-33.
  89. Högberg, D., Case, K. and De Vin, L.J. (2002). Overlapping Ergonomic Evaluation in the Automotive Design Process. Proceedings of the International Manufacturing Conference, IMC19, P.J. Armstrong (Ed.), Queen's University, Belfast, August 2002, pp. 233-241, ISBN 0-85389-8227.
  90. Högberg, D. and Case, K. (2002). Supporting 'Design for All' in Automotive Ergonomics. Proceedings of the XVIth Annual International Occupational Ergonomics and Safety Conference, The International Society for Occupational Ergonomics & Safety, Toronto, Canada, June 2002, CD-ROM. 

Editorships

  1. Högberg, D., Hanson, L. and Case, K. (2010). Guest Editors of International Journal of Human Factors Modelling and Simulation (IJHFMS), Special Issue on Application of Digital Human Modelling Tools in User Centred Design Processes, Vol. 1, No. 4, Inderscience Enterprises Ltd, ISSN (Print): 1742-5549, ISSN (Online): 1742-5557.

Book Chapters

  1. Hanson, L. and Högberg, D. (2012). Use of Anthropometric Measures and Digital Human Modelling Tools for Product and Workplace Design. In: Handbook of Anthropometry: Physical Measures of Human Form in Health and Disease. Preedy, V.R. (Ed.). Springer. pp. 3015-3034, ISBN 978-1-4419-1787-4.
  2. Hanson, L., Högberg, D. and Nåbo, A. (2008). Digital Human Modelling in Automotive Product Applications. In: Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering. Duffy, V.G. (Ed.). Taylor & Francis, CRC Press. ISBN 978-0805-85-646-0.

Other Publications 

  1. Sun, J., Redyuk, S., Billing, E., Högberg, D. and Hemeren, P. (2017). Tactile interaction and social touch: Classifying human touch using a soft tactile sensor. Accepted for presentation at the 5th International Conference on Human-Agent Interaction (HAI 2017), Germany, October
    17-20, 2017.
  2. Sun, J., Billing, E., Seoane, F., Zhou, B., Högberg, D. and Hemeren, P. (2017). Categories of touch: Classifying human touch using a soft tactile sensor. Accepted for presentation at the workshop on "The robotic sense of touch: from sensing to understanding" at the 2017 IEEE International Conference on Robotics and Automation (ICRA), Singapore, 29 May to 3 June, 2017.
  3. Blomé, M., Lundh, M., Hanson, L. and Dan Högberg, D. (2015). Introducing ergonomics visualisation and simulation for exploring design problems and solutions in workstation design on ships. Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Lindgaard, G. and Moore, D. (Eds.), Melbourne, Australia, 9-14 August, 2015. Abstract paper.
  4. Film about the IMMA project (2014). View at: www.youtube.com/watch?v=4rP36HA8yjY (in Swedish).
  5. Hanson, L., Högberg, D., Carlson, J.S., Bohlin, R., Brolin, E., Delfs, N., Mårdberg, P., Gustafsson, S., Keyvani, A., Rhen, I-M. (2014). IMMA – Intelligently moving manikins in automotive applications. Proceeding of ISHS 2014, Third International Summit on Human Simulation, Japan, May 2014.
  6. Bäckstrand, G., Thorvald, P. and Nylén, U. (2013). Flexibel montering möter industrins utmaningar. Teknik och tillväxt : nyheter från IVF Industriforskning och utveckling AB, 2013(3), 5 (in Swedish).
  7. Bäckstrand, G. and Högberg, D. (2010). Variants = Customer value? Standards News Magazine, Volvo Corporate Standards, Volvo Group, No. 2, Dec. 2010, pp. 17-19.
  8. Nilsson, P., Johansson, H., Högberg, D., Arén, B., Söderström, E. and Chibba, A. (2009). Distribuerad case-metodik i ingenjörsutbildningen. Proceedings, 2:a Utvecklingskonferensen för Sveriges ingenjörsutbildningar, Lund University, December 2009, pp. 71-73. (In Swedish).
  9. Rexfelt, O., Hjort af Ornäs, V. and Rosenblad, E. (2007). PSS for private consumers- User requirements and prerequisites for consumer acceptance, 2nd National Workshop on Functional Products – Development and sales, October 24-25 2007, Luleå University of Technology; Luleå.
  10. Hiort af Ornäs, V., Persson, S. and Jordan, P. W. (2007). Things, constructs and meanings; Paper presented at Design Semiotics in Use - 6:th Nordcode Seminar & Workshop, UIAH, Helsinki June 10-12, 2007.
  11. Hiort af Ornäs, V. and Rexfelt, O. (2007). Möjliggöranden, Avlastningar, Tvång och Hinder- Konsumenters resonemang kring praktiska konsekvenser av fyra funktionserbjudanden; Göteborg: Chalmers tekniska högskola; Institutionen för Produkt och Produktionsutveckling: Avdelningen för design, rapport 28; ISSN: 1652-9243.
  12. Hiort af Ornäs, V. and Rexfelt, O. (2007). Kundkrav vid funktionsförsäljning -Teoriöversikt och erfarenheter från Göteborg Energi. Göteborg: Chalmers tekniska högskola; Avdelningen för design, rapport 9; ISSN: 1652-9243 (in Swedish).
  13. Hiort af Ornäs, V. (2006). Communicative challenges with dematerialised products. Working paper presented at Connecting fields-5:th Nordcode Seminar & Workshop Oslo, May 10-12, 2006.
  14. Rexfelt, O. and Hiort af Ornäs, V. (2006). Funktionsförsäljning till privatkonsumenter -Resonemang kring fyra funktionserbjudanden. Göteborg: Chalmers tekniska högskola; Avdelningen för design, rapport 10; ISSN: 1652-9243 (in Swedish)
  15. Rexfelt, O. & Hiort af Ornäs, V. (2006). Betalning för nytta - Privatkonsumenters resonemang kring tre funktionserbjudanden. Göteborg: Chalmers tekniska högskola; Institutionen för Produkt och Produktionsutveckling: Avdelningen för design, rapport 17; ISSN: 1652-9243.
  16. Hiort af Ornäs, V. (2005). Users, Emotions and meaningful things. Research plan presented at Semantic approach in design research- Nordcode doctoral seminar, October 26-28 2005, Helsinki.
  17. Högberg, D. (2003). Use of Characters and Scenarios in Gear Shift Design. Proceedings of the Conference on Designing Pleasurable Products and Interfaces, Pittsburgh, USA, June 2003, pp. 140-141.