Publications

Mechanics of Materials publications 2017-1985.

   2013  2008  2003  1997  1989
 2017  2012  2007  2002  1996  1988
 2016  2011  2006  2001  1995  1987
 2015  2010  2005  2000  1993  1986
 2014  2009  2004  1998  1991  1985 

2017

U Stigh and A Biel (2017) Studies of fracture in shear of a constrained layer. Proceedings of XLV International Summer School - Conference APM 2017, pp. 420-428.

Kaveh Amouzgar, Niclas Strömberg (2017) Radial basis functions as surrogate models with a priori bias in comparison with a posteriori bias. Structural and multidisciplinary optimization. 55:1453–1469. DOI 10.1007/s00158-016-1569-0

A Biel and U Stigh. Strength and toughness in pure shear of constrained layers. Submitted.

A Biel and U Stigh. Cohesive Zone Modelling of Nucleation, Growth and Coalesce of Cavities. International Journal of Fracture, 2017, Volume 204, Issue 2, pp 159–174. (Diva) http://rdcu.be/ytPj

2016

A Biel and H Toftegaard. Delamination initiated by a defect. In Proceedings 37th Risø International Symposium on Materials Science IOP Publishing: IOP Conf. Series: Materials Science and Engineering 139 (2016) 012015 doi:10.1088/1757-899X/139/1/012015

B. Madsen, A. Biel, Y. Kusano, H. Lilholt, L.P. Mikkelsen, L. Mishnaevsky Jr., B.F. Sørensen (eds) (2016) Proceedings of the 37th Risø International Symposium on Materials Science: Understanding performance of composite materials – mechanisms controlling properties.

Petri Oinonen, K. Holger, Monica Ek, Gunnar Henriksson, Rosana Moriana*. ”BIOINSPIRED COMPOSITES FROM CROSS-LINKED GALACTOGLUCOMANNAN AND MICROFIBRILLATED CELLULOSE: THERMAL, MECHANICAL AND OXYGEN BARRIER PROPERTIES”. Carbohydrate Polymers, 2016, vol 136, pages 146 - 153

Oihana Gordobil, Rosana Moriana, Liming Zhang, Olena Sevastyanova. ”ASSESMENT OF TECHNICAL LIGNINS FOR USES IN BIOFUELS AND BIOMATERIALS: STRUCTURE-RELATED PROPERTIES, PROXIMATE ANALYSIS AND CHEMICAL MODIFICATION”. Industrial Crops and Products 2016, vol 83, pp. 155 - 165.

Dongfang Li, Rosana Moriana, Monica EK. “FROM FOREST WASTES TO ADDED VALUE PRODUCTS: USING A GREEN OXYGEN-BARRIER COATING FROM BIRCH BARK ON NANOCOMPSITES DERIVED FROM SPRUCE RESIDUES”.  Nordic Pulp and Paper Journal Research 2016, vol 31

Lina N. Samuelsson, Matthaus U. Babbler, Rosana Moriana. “PYROLYSIS OF KRAFT PULP AND BLACK LIQUOR PRECIPITATES DERIVED FROM SPRUCE: THERMAL AND KINETIC ANALYSIS. Fuel Processing Technology 2016, vol 149, pages 275-284

Rosana Moriana, Francisco Vilaplana, Monica Ek. “CELLULOSE NANOCRYSTALS FROM FOREST RESIDUES AS REINFORCING AGENTS FOR COMPOSITES: A STUDY FROM MACRO- TO NANO-DIMENSIONS.” Carbohydrate Polymers, 2016, Vol 39, pages 139-149 .

D. Svensson, K.S. Alfredsson, U. Stigh (2016) On the ability of coupled mixed mode cohesive laws to conform to LEFM for cracks in homogeneous orthotropic solids. Engineering Fracture Mechanics 163:426-448, http://dx.doi.org/10.1016/j.engfracmech.2016.05.018 Diva

Ulf Stigh, Anders Biel, Daniel Svensson (2016) Cohesive zone modelling and the fracture process of structural tape. Procedia Structural Integrity, 2, 235-244, 10.1016/j.prostr.2016.06.031 Diva Presentation at ECF21

Ulf Stigh (2016) Applications of equilibrium of configurational forces for the measurement of cohesive laws. Proceedings ECCM17 - 17th European Conference on Composite Materials, Munich, Germany, 26-30th June 2016. ISBN 978-3-00-053387-7 Diva

Anders Biel, Mobina Chaudhry, Stefan Gustafsson and Håkan Nygren (2016) The use of MgO-paste as a biodegradeable bone cement. Materials Today: Proceedings 3 ( 2016 ) 556 – 561. Diva

Walander T, Eklind A, Carlberger T, Stigh U, Rietz, A. Prediction of mixed-mode cohesive fatigue strength of adhesively bonded structure using Mode I data. International Journal of Adhesion and Adhesives, 66 (2016)15–25 Diva

D Svensson, S Alfredsson, U Stigh, Niklas Jansson. Measurement of cohesive law for kink-band formation in unidirectional composite. Engineering Fracture Mechanics 151 (2016) 1–10 Diva

2015

K Mauritsson, PD Folkow (2015) Dynamic equations for a fully anisotropic piezoelectric rectangular plate. Computers and Structures 153:112–125

MW Tahir, F Stig, M Åkermo, S Hallström (2015) A numerical study of the influence from architecture on the permeability of 3D-woven fibre reinforcement. Composites: Part A 74 (2015) 18–25.

F Stig, MW Tahir, M Åkermo, S Hallström (2015) An experimental study of the influence from fibre architecture on the permeability of 3D-woven textiles. Journal of Reinforced Plastics and Composites. Vol. 34(17) 1444–1453.

KS Alfredsson, A Biel, S Salimi (2015) Shear testing of thick adhesive layers using the ENF-specimen. International Journal of Adhesion and Adhesives, 62:130-138. DOI information: 10.1016/j.ijadhadh.2015.07.008 Diva

A. Biel, U. Stigh (2015) Measurement of tensile properties of fibres using a DCB-specimen. Proc ICCM20, Copenhagen, Denmark.

T. Walander (2015) Influences of temperature, fatigue and mixed mode loading on the cohesive properties of adhesive layers. Thesis for the degree of doctor of Philosophy in Solid and Structural Mechanics - Delamination and Fibre Compressive Failure, Chalmers University of Thechnology, Göteborg, Sweden. Diva

D. Svensson (2015) On Cohesive Modelling of Carbon/Epoxy Composites. Thesis for the degree of doctor of Philosophy in Solid and Structural Mechanics - Delamination and Fibre Compressive Failure, Chalmers University of Thechnology, Göteborg, Sweden. Diva

T Walander, S Marzi, O Hesebeck (2015) Controlled mixed-mode bending tests to determine cohesive laws of structural adhesive layers. Submitted

D. Svensson, K.S. Alfredsson, U. Stigh (2015) Measurement of mixed mode cohesive laws for interlaminar failure of CFRP. Submitted

S Marzi, A Biel, O Hesebeck (2015) 3D Optical Displacement Measurements on Dynamically Loaded Adhesively Bonded T-Peel Specimens. International Journal of Adhesion and Adhesives, 56, 41-45, http://dx.doi.org/10.1016/j.ijadhadh.2014.07.013. DIVA

2014

MW Tahir, S Hallström, M Åkermo (2014) Effect of dual scale porosity on the overall permeability of fibrous structures. Composites Science and Technology 103 (2014) 56–62.

U Stigh, A Biel, T Walander (2014) Shear Strength of Adhesive Layers - Models and Experiments. Engineering Fracture Mechanics, 129: 67-76. DOI: 10.1016/j.engfracmech.2014.07.033 DIVA

A. Eklind, T. Wallander, T. Carlberger, U. Stigh (2014) High cycle fatigue crack growth in Mode I of adhesive layers - Modelling, simulation and experiments. International Journal of Fracture, Volume 190, Issue 1-2, pp 125-146 DIVA

D. Svensson, K.S. Alfredsson, U. Stigh and A. Biel. (2014) Measurement of cohesive laws for initiation of delamination of CFRP. Composites Science and Technology. Volume 100, 21 August 2014, Pages 53-62. DOI: 10.1016/j.compscitech.2014.05.031 DIVA

Walander T, Eklind A, Carlberger T, Stigh U. 2014. Fatigue damage of adhesive layers - experiments and models. Procedia Materials Science 3:829-834 doi: 10.1016/j.mspro.2014.06.135. DIVA

Biel A, Alfredsson KS, Carlberger, T. 2014. Adhesive tapes; cohesive laws for a soft layer. Procedia Materials 3:1389-1393. 10.1016/j.mspro.2014.06.224. DIVA

Stigh U, Biel A. 2014. Shear properties of an adhesive layer exposed to a compressive load. Procedia Materials Science 3:1626 – 1631. DOI: 10.1016/j.mspro.2014.06.262 DIVA

Marzi S, Hesebeck O, Brede M, Nagel C, Biel A, Walander T, Stigh U (2014) Effects of the bond line thickness on the fracture mechanical behaviour of structural adhesive joints. Proceedings of the Annual Meeting of the Adhesion Society 2014. DIVA

2013

T. Walander, A. Biel and U. Stigh (2013) Temperature dependence of cohesive laws for an epoxy adhesive in Mode I and Mode II loading. International Journal of Fracture, Volume 183, Issue 2, pp 203-221. DOI 10.1007/s10704-013-9887-3

D Svensson, KS Alfredsson, U Stigh, N Jansson (2013) An experimental method to determine the critical energy release rate associated with longitudinal compressive failure in CFRP. Proc 19th Int Conf Comp Mat, Montreal, Canada 28 July to 2 Aug 2013. ISBN: 978-0-9696797-1-4

T. Walander (2013) Cohesive modelling of the temperature dependence of epoxy based adhesives in Mode I and Mode II loading. (Lic. no. 2013:08) Chalmers Tekniska Högskola, Göteborg. ISSN 1652-8565

D. Svensson (2013) Experimental methods to determine model parameters for failure modes of CFRP. (Lic. no. 2013:07) Chalmers Tekniska Högskola, Göteborg. ISSN 1652-8565

2012

S. Salimi (2012) Application of cohesive modeling in joining technology - Thick adhesive layers and rivet joints. (Lic. no. 2012:21) Chalmers Tekniska Högskola, Göteborg. ISSN 1652-8565

A. Biel, T. Walander, U. Stigh (2012) Influence of Edge-boundaries on the Cohesive Behaviour of an Adhesive Layer. Proceedings of ASME 2012, Houston, TX, USA, Nov 9-15 2012

A. Biel, U. Stigh, T. Walander (2012) A critical study of an alternative method to measure cohesive properties of an adhesive layer. Proceeding of the 19th European Conference on Fracture, Kazan, Russia, Aug. 26-31 2012.

T. Walander, A. Biel, U. Stigh (2012) An evaluation of the temperature dependence of cohesive properties for two structural epoxy adhesives. Proceeding of the 19th European Conference on Fracture, Kazan, Russia, Aug. 26-31 2012.

U. Stigh, A. Biel, T. Walander (2012). Fracture of adhesive layers in Mode II. Proceeding of the 19th European Conference on Fracture, Kazan, Russia, Aug. 26-31 2012.

K.S. Alfredsson, A.A. Gawandi, J.W. Gillespie Jr., L.A. Carlsson, T.A. Bogetti (2012) Flexural analysis of discontinuous tile core sandwich structure. Composite Structures 94, 1524–1532

K.S.Alfredsson, and U.Stigh, Stability of beam-like fracture mechanics specimens. Engineering Fracture Mechanics, Vol 89, July 2012, 98-113

A. André, R. Haghani and A. Biel (2012). Application of fracture mechanics to predict the failure load of adhesive joints used to bond CFRP laminates to steel members, Construction & Building Materials, Volume 27, Page 331-340.

2011

K Mauritsson, PD Folkow, A Boström (2011) Dynamic equations for  a fully anisotropic elastic plate. Journal of Sound and Vibration 330:2640–2654.
 
S. Marzi, A. Biel, U.Stigh (2011). On Experimental Methods to Investigate the Effect of Layer Thickness on the Fracture Behaviour of Adhesively Bonded Joints, International Journal of Adhesion and Adhesives, 31, 840-850. doi:10.1016/j.ijadhadh.2011.08.004 (one of the most cited papers in this journal since 2011)
 

A. Biel, U. Stigh (2011). Damage and plasticity of adhesive layers: an experimental study. Procedia Engineering,Vol. 10, 2280-2285.

K.S. Alfredsson, A.A. Gawandi, J.W. Gillespie Jr., L.A. Carlsson, T.A. Bogetti (2011). Stress analysis of axially and thermally loaded discontinuous tile core sandwich with and without adhesive filled core gaps. Composite Structures, 93, 1621–1630. doi:10.1016/j.compstruct.2011.01.015

2010

PD Folkow, K Mauritsson (2010) DYNAMIC HIGHER-ORDER EQUATIONS FOR FINITE RODS. The Quarterly Journal of Mechanics and Applied Mathematics, 63 (1):1-22.

K. Salomonsson and T. Andersson (2010). Weighted potential methodology for mixed mode cohesive laws. Proceedings of the MECOM DEL BICENTENARIO, IX Argentinian Congress on Computational Mechanics, MECOM 2010-CILAMCE 2010, November 15-18, 2010, Buenos Aires, Argentina. ISSN: 1666-6070

U. Stigh (2010). Cohesive laws for delamination of CFRP - experiments and model. Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition, IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada. ISBN: 978-0-7918-3891-4

U. Stigh and D. Svensson (2010). On cohesive laws for delamination of composites. Proceedings of ECCM 14, Budapest, Hungary, June 7-10.

T. Carlberger and U. Stigh. Influence of layer thickness on cohesive properties of an epoxy-based adhesive – an experimental study. The Journal of Adhesion, 86:814–833, 2010 . DOI: 10.1080/00218464.2010.498718

A. Biel and U. Stigh (2010) Damage and plasticity in adhesive layer - an experimental study. International Journal of Fracture, 165:93–103. DOI 10.1007/s10704-010-9508-3

T. Carlberger and U. Stigh. Dynamic testing and simulation of hybrid joined bi-material beam. Thin-Walled Structures, 48 (2010) 609–619. doi:10.1016/j.tws.2010.03.003

Ulf Stigh, K. Svante Alfredsson, Tobias Andersson, AndersBiel, Thomas Carlberger, and Kent Salomonsson. Some aspects of cohesive models and modelling with special application to strength of adhesive layers. International Journal of Fracture.Volume 165, Issue 2 (2010), Page 149-162. DOI: 10.1007/s10704-010-9458-9.

2009

K Mauritsson (2009) Modelling of finite piezoelectric patches: Comparing an approximate power series expansion theory with exact theory. International Journal of Solids and Structures 46:1053–1065.

U. Stigh, K. S. Alfredsson, and A. Biel, Measurement of cohesive laws and related problems. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE2009, November 13-19, 2009, Lake Buena Vista, Florida, USA. ISBN 978-0-7918-3863-1

K. Salomonsson and U. Stigh, Influence of root curvature on the fracture energy of adhesive layers. Engineering Fracture Mechanics. Volume 76, Issue 13, September 2009, Pages 2025-2038.

K.S. Alfredsson, J.W. Gillespie Jr, L.A. Carlsson, T.A. Bogetti and A. Yiournas. Flexure analysis of unsymmetric orthotropic beams with an interlayer. International Journal of Solids and Structures 2009; 46: 2093-2110.

T. Carlberger, A. Biel and U. Stigh. Influence of temperature and strain rate on cohesive properties of a structural epoxy adhesive. International Journal of Fracture: Volume 155, Issue2 (2009), Page 155-166.

Walander, T. (2009). System for measurement of cohesive laws. M.Sc. Thesis, University of Skövde

2008

K Mauritsson, A Boström, PD Folkow (2008) Modelling of thin piezoelectric layers on plates. Wave Motion 45:616–628

K. Salomonsson and U. Stigh. An adhesive interphase element for structural analyses. Int. J. Numer. Meth. Engng 2008; 76:482–500. DOI: 10.1002/nme.2333

T. Carlberger (2008). Adhesive Joining for Crashworthiness - Material Data and Explicit FE-methods. (PhD thesis). Chalmers University of Technology.

A. Biel (2008). Mechanical Behaviour of Adhesive Layers - Experimental Methods, Cohesive Laws, and Fracture Mechanics. (PhD thesis). Chalmers University of Technology. Summary, Paper A, Paper B, Paper C, Paper D, Paper E, Paper F

Alfredsson, K.S. and Högberg, J. L. A Closed-Form Solution to Statically Indeterminate Adhesive Joint Problems - Exemplified on ELS-specimens. International Journal of Adhesion and Adhesives. 28 (2008) 350–361. DOI:10.1016/j.ijadhadh.2007.10.002

T. Carlberger, K.S. Alfredsson and U. Stigh. FE-formulation of Interphase Elements for Adhesive Joints. International Journal for Computational Methods in Engineering Science & Mechanics, Volume 9, Issue 5 September 2008, pages 288 - 299. DOI: 10.1080/15502280802229590

K. Salomonsson. Mixed mode modeling of a thin adhesive layer using a meso-mechanical model. Mechanics of Materials, Volume 40, Issue 8, August 2008, Pages 665-672.doi:10.1016/j.mechmat.2008.02.006.

A. Biel and U. Stigh. Effects of constitutive parameters on the accuracy of measured fracture energy using the DCB-specimen.Engineering Fracture Mechanics, 75 (2008) 2968–2983. DOI:10.1016/j.engfracmech.2008.01.002

Alfredsson, K.S., Bogetti, T.A., Carlsson, L.A., Gillespie Jr., J.W. and Yiournas A. Flexure of beams with an interlayer – symmetric beams with orthotropic adherends. Journal of Mechanics of Materials and Structures, Vol 3, No 1, 45-62, 2008.

K. Salomonsson and T. Andersson. Modeling and parameter calibration of an adhesive layer at the meso level. Mechanics of Materials, Volume 40, Issues 1-2, January-February 2008, Pages 48-65. DOI: 10.1016/j.mechmat.2007.06.004

Svensson, D. and Walander, T. (2008). Evaluation of an Interphase Element using Explicit Finite Element Analysis. B.Sc. Thesis, University of Skövde.

2007

K. Salomonsson (2007). Meso-mechanical modeling and analysis of adhesive layers. (PhD thesis). Chalmers University of Technology.

Alfredsson, K.S. and Högberg, J.L. (2007). Energy release rate and mode-mixity of adhesive joint specimens. International Journal of Fracture. Volume 144, Number 4 / April, 2007. DOI10.1007/s10704-007-9099-9.

J.L. Högberg, B.F. Sørensen and U. Stigh. (2007). Constitutive behaviour of mixed mode loaded adhesive layer. International Journal of Solids and Structures, Volume 44, pp. 8335–8354. DOI: 10.1016/j.ijsolstr.2007.06.014

K. Salomonsson and U. Stigh. (2007). On the apparent influence of the adherends on the fracture toughness of adhesive layers. Proc. of 28th Risø International Symposium on Materials Science, Polymer Composite Materials for Wind Power Turbines, 2007. Eds B.F. Sørensen et al.

A. Biel and T. Carlberger. (2007). Influence of temperature on cohesive parameters for adhesives. Proc. of 28th Risø International Symposium on Materials Science, Polymer Composite Materials for Wind Power Turbines, 2007. Eds B.F. Sørensen et al.

A. Biel and U. Stigh. (2007). An analysis of the evaluation of the fracture energy using the dcb-specimen. Archives of Mechanics, Vol 59, issue 4-5, pp. 311-327.

T. Carlberger and U. Stigh. (2007). An explicit FE-model of impact fracture in an adhesive joint. Engineering Fracture Mechanics. Volume 74, Issue 14, September 2007, Pages 2247-2262. DOI:10.1016/j.engfracmech.2006.10.016

J.L. Högberg. (2007). Mixed Mode Loaded Adhesive Layers - from measurements of material data to analysis of structural behaviour. (PhD thesis). Chalmers University of Technology.

K. Leffler, K. S. Alfredsson and U. Stigh. (2007). Shear behaviour of adhesive layers. International Journal of Solids and Structures, Vol 44, pp. 530-545. DOI:10.1016/j.ijsolstr.2006.04.036

2006

J.L. Högberg. (2006). Unbalanced DCB-specimen. CDCM 2006 - Conference on Damage in Composite Materials 18th-19th of September 2006 in Stuttgart, Germany. Online-Proceedings.

J.L. Högberg and K. Salomonsson. (2006). Simulation of an adhesive layer using a novel mixed mode cohesive law. CDCM 2006 - Conference on Damage in Composite Materials 18th-19th of September 2006 in Stuttgart, Germany. Online-Proceedings.

L. Högberg. (2006). Mixed mode cohesive law. International Journal of Fracture, Vol. 141, No. 3-4, pp. 549-559.

K. Salomonsson and T.Andersson. (2006). Simulation of crack initiation and propagation in an adhesive layer using a meso-mechanical model. Proc. of 27th Risø International Symposium on Materials Science, Polymer Composite Materials for Wind Power Turbines, 2006

L. Högberg. (2006). Mixed Mode Testing of Adhesive Layer. Proc. of 27th Risø International Symposium on Materials Science, Polymer Composite Materials for Wind Power Turbines, 2006

T. Carlberger. (2006). Impact Simulation of Adhesively Joined Structures. (Lic.) Chalmers Tekniska Högskola, Göteborg.ISSN 1652-8565 2006:11

T. Andersson. (2006). Mechanical behaviour of adhesive layers - methods to extract peel and mixed mode properties. (PhD thesis). Chalmers University of Technology.

Andersson, T. and Biel, A. (2006). On the effective constitutive properties of a thin adhesive layer loaded in peel. International Journal of Fracture, Vol. 141, No. 1-2, pp. 227-246.

Högberg, J. L. and Stigh, U. (2006). Specimen proposals for mixed mode testing of adhesive layer. Engineering Fracture Mechanics, vol. 73, pp 2541-2587. DOI:10.1016/j.engfracmech.2006.04.017

Stigh, U. (2006). Continuum Damage Mechanics and the Life-Fraction Rule. ASME Journal of Applied Mechanics, Vol 73, July 2006, pp 702-704.

2005

Biel, A. (2005). Constitutive behaviour and fracture toughness of an adhesive layer. (Lic.) Chalmers Tekniska Högskola, Göteborg ISSN 1652-8565 2005:24

Leffler, K and Stigh, U. (2005). On the existence of a unique stress-deformation relation for an adhesive layer loaded in shear. In CD-Proceedings from the 11th International Conference on Fracture – ICF11, Turin 20-25 mars 2005.

Leffler, K. (2005). Shear Behaviour of Adhesive Layers (Lic.) Chalmers Tekniska Högskola, Göteborg ISSN 1652-8565 2005:15

Salomonsson, K. (2005). Meso-Mechanical Modeling of Thin Adhesive Layers (Lic.) Chalmers Tekniska Högskola, Göteborg ISSN 1652-8565 2005:14

2004

Alfredsson, K.S. (2004). Constitutive Behaviour and Fracture of Adhesive Layers (PhD thesis). Chalmers Tekniska Högskola, Göteborg.

Alfredsson K.S. (2004) On the instantaneous energy release rate of the end-notch flexure adhesive joint specimen, International Journal of Solids and Structures 41, pp. 4787–4807.

Andersson, T. & Salomonsson, K. (2004). Meso-mechanical modeling of thin adhesive layers. In Nilsson, F. (Ed.) Proceedings from The 15th European Conference on Fracture (ECF 15), 11-13 aug., KTH, Stockholm.

Andersson, T. & Biel, A. (2004). Effects of the length of the damage zone on the effective constitutive properties of an adhesive layer loaded in peel. In Nilsson, F. (Ed.) Proceedings from The 15th European Conference on Fracture (ECF 15), 11-13 aug., KTH, Stockholm.

Högberg, J.Li (2004). Mechanical Behaviour of Single-Layer Adhesive Joints – an integrated approach (Lic.) Chalmers Tekniska Högskola, Göteborg ISSN 1650-8912 2004:3

K. S. Alfredsson and U. Stigh (2004)Continuum Damage Mechanics Revised – APrinciple for Mechanical and Thermal Equivalence. Int. J. Solids and Structures,41 4025-4045. DOI:10.1016/j.ijsolstr.2004.02.052

Andersson T. and Stigh U. The stress-elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forces, In International Journal of Solids and Structures, Vol. 41 (2004), Elsevier, pp. 413-434. DOI:10.1016/j.ijsolstr.2003.09.039

2003

Alfredsson K.S. (2003) On the determination of constitutive properties of adhesive layers loaded in shear - an exact inverse solution, International Journal of Fracture, 123, Kluwer Academic Publishers, pp. 49-62. DOI 10.1023/B:FRAC.0000005794.80532.b9

Alfredsson K.S., Biel A. and Leffler K. (2003) An experimental method to determine the complete stress-deformation relation for a structural adhesive layer loaded in shear, In 9th International Conference on The Mechanical Behaviour of Materials, Geneva, Switzerland 2002

2002

Andersson, T. (2002). Stress-elongation behaviour of adhesive layers - an experimental method. Thesis for the degree of Licentiate in Engineering, Chalmers University of Technology, Göteborg, Sweden .

Salomonsson, K. (2002). Interphase elements connecting structural finite elements - formulation, implementation and verification. MSc Thesis.

2001

Andersson, T. and Stigh, U. (2001). Verification of an experimental method to measure the stress elongation law for an adhesive layer using a DCB-specimen. ICF10, Advances in Fracture (Ed. Ravi-Chandar K.), Elsevier.

2000

Stigh, U. and Andersson, T. (2000). An experimental method to determine the complete stress-elongatioin relation for a structural adhesive layer loaded in peel. Fracture of Polymers, Composites and Adhesives (Eds. Williams J.G. and Pavan A.), ESIS publication 27, pp. 297-306

1998

Andersson, T. (1998). Design of an experimental setup for measurement of adhesive peel properties. Thesis for the degree of master of science in mechanical engineering, University of Skövde.

Höglander, H. (1998). A method to determine plasticity and damage properties of adhesives using a DCB-test specimen. Thesis for the degree of master of science in mechanical engineering, University of Strathclyde, Scotland.

Strand, N. (1998). Micromechanical studies of damage in adhesive joints loaded in shear. Thesis for the degree of master of science in mechanical engineering, University of Strathclyde, Scotland.

Wigholm, P. (1998). Interaction diagrams for initial yield and limit load for adhesive joints loaded in peel. Thesis for the degree of master of science in mechanical engineering, University of Strathclyde, Scotland.

1997

Alfredsson, K.S. (1997). Active and reactive structural energy flow. Journal of Vibration and Acoustics, Vol. 119, pp. 70-79

Alfredsson, K.S. and Stigh, U. (1997). A method to determine constitutive properties of thin interface layers loaded in shear. ICF9, Advances in Fracture Research (Eds. Karihaloo B.L., Mai Y-W., Ripley M.I. and Ritchie R.O.), Pergamon, Amsterdam, Vol. 5, pp. 2667-2674

1996

Alfredsson, K.S., Josefson, B.L. and Wilson, M.A. (1996). Use of the energy flow concept in vibration design. AIAA Journal, Vol. 34, No. 6, pp. 1251-1255

1995

Josefson, B.L., Stigh, U. and Hjelm, H.E. (1995). A nonlinear kinematic hardening model for elastoplastic deformations in grey cast iron. Journal of Engineering Materials and Technology, Vol. 117, pp. 145-150

1993

Alfredsson, K.S. (1993). Influence of local damping on active and reactive mechanical power flow. 4th International Congress on Intensity Techniques, Senlis, France.

Stigh, U. (1993). The effect of core modelling on the self-force and self-energy of a dislocation. Mechanics of Material, Elsevier, Vol. 15, pp. 253-262

Stigh, U. (1993). A finite element study of threading dislocations. Mechanics of Material, Elsevier, Vol. 14, pp. 179-187

1991

Alfredsson, K.S. and Josefson, B.L. (1991). Harmonic response of a spot welded box beam - influence of welding residual stresses and deformations. Mechanical Effects of Welding (Eds. Karlsson, L., Lindgren, L-E. and Jonsson, M.).

Kim, K.S., Stigh, U. and Choi, H.C. (1991). A study on the energetic force of a point load.

Stigh, U. and Sotkovszki, P. (1991). Damage characterization by ultrasonic velocity measurement. Report F 144, Chalmers University of Technology, Göteborg, Sweden.

1989

Olsson, P. and Stigh, U. (1989). On the determination of the constitutive properties of thin interphase layers - an exact inverse solution. International Journal of Fracture, Vol. 41, R71-76

1988

Stigh, U. (1988). Damage and crack growth analysis of the double cantilever beam specimen. International Journal of Fracture, Vol. 37, R13-18

1987

Stigh, U. (1987). Initiation and growth of an interface crack. Mechanical behaviour of adhesive joints, Pluralis, Paris, France, pp. 237-248

Stigh, U. (1987). Influence of damage on ultrasonic velocity and strength - analysis and experiments. Engineering Fracture Mechanics, Pergamon Journals, Vol.28 No.1, pp. 1-12

1986

Stigh, U. (1986). Effects of interacting cavities on damage parameter. ASME Journal of Applied Mechanics, Vol. 53, pp. 485-490

Stigh, U. and Jansson, S. (1986). Instability of dilutely voided material in uniaxial tension. Engineering Fracture Mechanics, Vol. 25, Nos 5/6, pp. 615-623

1985

Stigh, U. and Jansson, S. (1985). Influence of cavity shape on damage parameter. ASME Journal of Applied Mechanics, Vol. 52, pp. 609-614

 

Applications of equilibrium of configurational forces for the measurement of cohesive laws

Experimental set-up for measurement of cohesive law during kink-band formation in carbon fibre composite