Publikationer Virtual Manufacturing Process

Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, September 11–13, 2018, University of Skövde, Sweden

2018. Konferensbidrag. https://doi.org/10.3233/978-1-61499-902-7-467

Applying Aggregated Line Modeling Techniques to Optimize Real World Manufacturing Systems

Simon Lidberg, Leif Pehrsson, Marcus Frantzén

Procedia Manufacturing

2018. Artikel. https://doi.org/10.1016/j.promfg.2018.06.061 Open Access

Using Aggregated Discrete Event Simulation Models and Multi-Objective Optimization to Improve Real-World Factories

Simon Lidberg, Leif Pehrsson, Amos H. C. Ng

Proceedings of the 2018 Winter Simulation Conference

2018. Konferensbidrag. https://doi.org/10.1109/WSC.2018.8632337 Open Access

Effects of strain rate on the cohesive properties and fracture process of a pressure sensitive adhesive

Ulf Stigh, Anders Biel

Engineering Fracture Mechanics

2018. Artikel. https://doi.org/10.1016/j.engfracmech.2018.07.011

Radial basis functions as surrogate models with a priori bias in comparison with a posteriori bias

Kaveh Amouzgar, Niclas Strömberg

Structural and multidisciplinary optimization (Print)

2017. Artikel. https://doi.org/10.1007/s00158-016-1569-0 Open Access

Cohesive zone modelling of nucleation, growth and coalesce of cavities

Anders Biel, Ulf Stigh

International Journal of Fracture

2017. Artikel. https://doi.org/10.1007/s10704-016-0168-9

A methodology for microstructure-based structural optimization of cast and injection moulded parts using knowledge-based design automation

Jakob Olofsson, Kent Salomonsson, Joel Johansson, Kaveh Amouzgar

Advances in Engineering Software

2017. Artikel. https://doi.org/10.1016/j.advengsoft.2017.03.003

Studies of fracture in shear of a constrained layer

Ulf Stigh, Anders Biel

Advanced Problems in Mechanics: Proceedings of the XLV Summer School Conference

2017. Konferensbidrag.

The use of MgO-paste as a biodegradeable bone cement

Anders Biel, Mobina Chaudhry, Stefan Gustafsson, Håkan Nygren

Materials Today

2016. Artikel. https://doi.org/10.1016/j.matpr.2016.01.090

Applications of equilibrium of configurational forces for the measurement of cohesive laws

Ulf Stigh

Proceedings ECCM17: 17th European Conference on Composite Materials Munich, Germany, 26-30th June 2016

2016. Konferensbidrag.

Cohesive zone modelling and the fracture process of structural tape

Ulf Stigh, Anders Biel, Daniel Svensson

Proceedia Structural Integrity

2016. Artikel. https://doi.org/10.1016/j.prostr.2016.06.031 Open Access

On the ability of coupled mixed mode cohesive laws to conform to LEFM for cracks in homogeneous orthotropic solids

Daniel Svensson, K. Svante Alfredsson, Ulf Stigh

Engineering Fracture Mechanics

2016. Artikel. https://doi.org/10.1016/j.engfracmech.2016.05.018

Measurement of cohesive law for kink-band formation in unidirectional composite

Daniel Svensson, K. Svante Alfredsson, Ulf Stigh, Nicklas E. Jansson

Engineering Fracture Mechanics

2016. Artikel. https://doi.org/10.1016/j.engfracmech.2015.10.040

Prediction of mixed-mode cohesive fatigue strength of adhesively bonded structure using Mode I data

Tomas Walander, Alexander Eklind, Thomas Carlberger, Ulf Stigh, Andreas Rietz

International Journal of Adhesion and Adhesives

2016. Artikel. https://doi.org/10.1016/j.ijadhadh.2015.12.003

Shear testing of thick adhesive layers using the ENF-specimen

K. Svante Alfredsson, Anders Biel, Saeed Salimi

International Journal of Adhesion and Adhesives

2015. Artikel. https://doi.org/10.1016/j.ijadhadh.2015.07.008

Measurement of tensile properties of fibres using a DCB-specimen

Anders Biel, Ulf Stigh

20th International Conference on Composite Materials: Copenhagen, 19-24th July 2015

2015. Konferensbidrag. Open Access

3D optical displacement measurements on dynamically loaded adhesively bonded T-peel specimens

Stephan Marzi, Anders Biel, Olaf Hesebeck

International Journal of Adhesion and Adhesives

2015. Artikel. https://doi.org/10.1016/j.ijadhadh.2014.07.013

On Cohesive Modelling ofCarbon/Epoxy Composites: Delamination and Fibre Compressive Failure

Daniel Svensson

2015. Doktorsavhandling.

Influences of temperature, fatigue and mixed mode loading on the cohesive properties of adhesive layers

Tomas Walander

2015. Doktorsavhandling. Open Access

Adhesive Tapes; Cohesive Laws for a Soft Layer

Anders Biel, K. Svante Alfredsson, Thomas Carlberger

Procedia Materials Science

2014. Artikel. https://doi.org/10.1016/j.mspro.2014.06.224 Open Access

Vilka hållfasthetsegenskaper har limfogen?: Simulering på Högskolan i Skövde ger svaren

Thomas Carlberger, Ulf Stigh

Fordonskomponenten

2014. Artikel, forskningsöversikt. Open Access

High cycle fatigue crack growth in Mode I of adhesive layers: modelling, simulation and experiments

Alexander Eklind, Tomas Walander, Thomas Carlberger, Ulf Stigh

International Journal of Fracture

2014. Artikel. https://doi.org/10.1007/s10704-014-9979-8

Effects of the bond line thickness on the fracture mechanical behaviour of structural adhesive joints

Stephan Marzi, Olaf Hesebeck, Markus Brede, Christof Nagel, Anders Biel, Tomas Walander, Ulf Stigh

Proceedings of the Annual Meeting of the Adhesion Society 2014

2014. Konferensbidrag. Open Access

A Controlled Mixed-Mode Bending (CMMB) test to investigate the fracture of structural adhesive joints

Stephan Marzi, Tomas Walander, Olaf Hesebeck, Markus Brede

7th International Conference on Fracture of Polymers, Composites and Adhesive 14 - 18 September 2014, Les Diablerets, Switzerland

2014. Konferensbidrag, muntlig presentation med abstract.

Shear properties of an adhesive layer exposed to a compressive load

Ulf Stigh, Anders Biel

Procedia Materials Science

2014. Artikel. https://doi.org/10.1016/j.mspro.2014.06.262 Open Access

Shear strength of adhesive layers – models and experiments

Ulf Stigh, Anders Biel, Tomas Walander

Engineering Fracture Mechanics

2014. Artikel. https://doi.org/10.1016/j.engfracmech.2014.07.033

Measurement of cohesive laws for interlaminar failure of CFRP

Daniel Svensson, K. Svante Alfredsson, Anders Biel, Ulf Stigh

Composites Science And Technology

2014. Artikel. https://doi.org/10.1016/j.compscitech.2014.05.031

Fatigue damage of adhesive layers: experiments and models

Tomas Walander, Alexander Eklind, Thomas Carlberger, Ulf Stigh

Procedia Materials Science

2014. Artikel. https://doi.org/10.1016/j.mspro.2014.06.135 Open Access

Flexural analysis of discontinuous tile core sandwich structure

K. Svante Alfredsson, A. A. Gawandi, J. W. Gillespie Jr., L. A. Carlsson, T. A. Bogetti

Composite structures

2012. Artikel. https://doi.org/10.1016/j.compstruct.2011.11.028

Application of fracture mechanics to predict the failure load of adhesive joints used to bond CFRP laminates to steel members

A. Andre, Reza Haghani, Anders Biel

Construction and Building Materials

2012. Artikel. https://doi.org/10.1016/j.conbuildmat.2011.07.040

Influence of Edge-boundaries on the Cohesive Behaviour of an Adhesive Layer

Anders Biel, Tomas Walander, Ulf Stigh

ASME 2012 International Mechanical Engineering Congress and Exposition, November 9–15, 2012, Houston, Texas, USA: Volume 8: Mechanics of Solids, Structures and Fluids

2012. Konferensbidrag. https://doi.org/10.1115/IMECE2012-89534

An evaluation of the temperature dependence of cohesive properties for two structural epoxy adhesives

Tomas Walander, Anders Biel, Ulf Stigh

19th European Conference on Fracture

2012. Konferensbidrag.

Stress analysis of axially and thermally loaded discontinuous tile core sandwich with and without adhesive filled core gaps

K. Svante Alfredsson, A. A. Gawandi, J. W., Jr. Gillespie, L. A. Carlsson, T. A. Bogetti

Composite structures

2011. Artikel. https://doi.org/10.1016/j.compstruct.2011.01.015

On experimental methods to investigate the effect of layer thickness on the fracture behavior of adhesively bonded joints

Stephan Marzi, Anders Biel, Ulf Stigh

International Journal of Adhesion and Adhesives