Magnus Holm

Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10–12 September 2019, Queen’s University, Belfast, UK

2019. Konferensbidrag. https://doi.org/10.3233/ATDE190031

Operators perspective on augmented reality as a support tool in engine assembly

Oscar Danielsson, Anna Syberfeldt, Magnus Holm, Lihui Wang

Procedia CIRP

2018. Artikel. https://doi.org/10.1016/j.procir.2018.03.153 Open Access

Human-robot collaboration – towards new metrics for selection of communication technologies

Patrik Gustavsson, Magnus Holm, Anna Syberfeldt, Lihui Wang

Procedia CIRP

2018. Artikel. https://doi.org/10.1016/j.procir.2018.03.156 Open Access

The future shop-floor operators, demands, requirements and interpretations

Magnus Holm

Journal of manufacturing systems

2018. Artikel. https://doi.org/10.1016/j.jmsy.2018.03.004

A holistic solution for integrating a simulated twin of an automation system during the system’s entire life-cycle

Anna Syberfeldt, Mikel Ayani, Magnus Holm

Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, September 11–13, 2018, University of Skövde, Sweden

2018. Konferensbidrag. https://doi.org/10.3233/978-1-61499-902-7-405

Cloud Manufacturing: A Critical Review of Recent Development and Future Trends

Göran Adamson, Lihui Wang, Magnus Holm, Philip Moore

International journal of computer integrated manufacturing (Print)

2017. Artikel. https://doi.org/10.1080/0951192X.2015.1031704

Adaptive Decision Support for Shop-floor Operators using Function Blocks

Magnus Holm

2017. Doktorsavhandling.

Adaptive instructions to novice shop-floor operators using Augmented Reality

Magnus Holm, Oscar Danielsson, Anna Syberfeldt, Philip Moore, Lihui Wang

Journal of Industrial and Production Engineering

2017. Artikel. https://doi.org/10.1080/21681015.2017.1320592

A methodology facilitating knowledge transfer to both research experienced companies and to novice SMEs

Magnus Holm, Marcus Frantzén, Tehseen Aslam, Philip Moore, Lihui Wang

International Journal of Enterprise Network Management

2017. Artikel. https://doi.org/10.1504/IJENM.2017.10006499

A Cloud Service Control Approach for Distributed and Adaptive Equipment Control in Cloud Environments

Göran Adamson, Magnus Holm, Philip Moore, Lihui Wang

Procedia CIRP

2016. Artikel. https://doi.org/10.1016/j.procir.2015.12.020 Open Access

Feature-Based Adaptive Manufacturing Equipment Control for Cloud Environments

Göran Adamson, Lihui Wang, Magnus Holm, Philip Moore

Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference, 2016, vol 2

2016. Konferensbidrag. https://doi.org/10.1115/MSEC2016-8771

Dynamic maintenance priority of a real-world machining line

Marcus Frantzén, Magnus Holm, Anna Syberfeldt, Amos H. C. Ng, V. Karlsson, M. Bremert

Proceedings of the 7th Swedish Production Symposium

2016. Konferensbidrag.

Why I want to be a future Swedish shop-floor operator

Magnus Holm, Göran Adamson, Philip Moore, Lihui Wang

Procedia CIRP

2016. Artikel. https://doi.org/10.1016/j.procir.2015.12.057 Open Access

Localizing Operators in the Smart Factory: A Review of Existing Techniques and systems

Anna Syberfeldt, Mikel Ayani, Magnus Holm, Lihui Wang, Rodney Lindgren-Brewster

Proceedings of 2016 International Symposium on Flexible Automation

2016. Konferensbidrag.

Dynamic operator instructions based on augmented reality and rule-based expert systems

Anna Syberfeldt, Oscar Danielsson, Magnus Holm, Lihui Wang

Procedia CIRP

2016. Artikel. https://doi.org/10.1016/j.procir.2015.12.113 Open Access

Support Systems on the Industrial Shop-floors of the Future: Operators' Perspective on Augmented Reality

Anna Syberfeldt, Magnus Holm, Oscar Danielsson, Lihui Wang, Rodney Lindgren Brewster

Procedia CIRP

2016. Artikel. https://doi.org/10.1016/j.procir.2016.02.017 Open Access

Adaptive Robot Control as a Service in Cloud Manufacturing

Göran Adamson, Lihui Wang, Magnus Holm, Philip Moore

ASME 2015 International Manufacturing Science and Engineering Conference: Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing

2015. Konferensbidrag. https://doi.org/10.1115/MSEC2015-9479

Visual Assembling Guidance Using Augmented Reality

Anna Syberfeldt, Oscar Danielsson, Magnus Holm, Lihui Wang

Procedia Manufacturing

2015. Artikel. https://doi.org/10.1016/j.promfg.2015.09.068 Open Access

Adaptive Robotic Control in Cloud Environments

Göran Adamson, Lihui Wang, Magnus Holm, Philip Moore

Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing

2014. Konferensbidrag. https://doi.org/10.14809/faim.2014.0037

Function Block Approach for Adaptive Robotic Control in Virtual and Real Environments

Göran Adamson, Lihui Wang, Magnus Holm, Philip Moore

Proceedings of the 14th Mechatronics Forum International Conference, Mechatronics 2014

2014. Konferensbidrag.

Framework for an adaptive decision support system for industrial shop-floor operators

Magnus Holm, Göran Adamson, Lihui Wang, Philip Moore

12th International Industrial Simulation Conference 2014, ISC'2014: June 11-13, 2014, Skövde, Sweden

2014. Konferensbidrag. Open Access

The Future Swedish Shop-Floor Operator – Interviews with Production Managers

Magnus Holm, Göran Adamson, Lihui Wang, Philip Moore

Proceedings of the sixth Swedish Production Symposium, 2014

2014. Konferensbidrag.

Adaptive decision support for shop-floor operators in automotive industry

Magnus Holm, Aimar Cordero Garcia, Göran Adamson, Lihui Wang

Procedia CIRP

2014. Artikel. https://doi.org/10.1016/j.procir.2014.01.085 Open Access

Augmented Reality at the Industrial Shop-Floor

Anna Syberfeldt, Oscar Danielsson, Magnus Holm, Tom Ekblom

Augmented and Virtual Reality: First International Conference, AVR 2014, Lecce, Italy, September 17-20, 2014, Revised Selected Papers

2014. Kapitel i bok. https://doi.org/10.1007/978-3-319-13969-2_16

The state of the art of cloud manufacturing and future trends

Göran Adamson, Lihui Wang, Magnus Holm

Proceedings of the ASME 2013 International Manufacturing Science and Engineering Conference MSEC2013 June 10-14, 2013, Madison, Wisconsin, USA

2013. Konferensbidrag. https://doi.org/10.1115/MSEC2013-1123

Enhancing Adaptive Production Using IEC 61499 Event-Driven Function Blocks

Magnus Holm, Göran Adamson, Lihui Wang

Proceedings of the North American Manufacturing Research Institution of SME, vol. 41, 10-14 June, University of Wisconsin-Madison

2013. Konferensbidrag.

Event-Driven Adaptability using IEC 61499 in Manufacturing Systems

Göran Adamson, Magnus Holm, Lihui Wang

Proceedings of The 5th International Swedish Production Symposium, SPS12

2012. Konferensbidrag.

Adaptive Assembly Feature Based Function Block Control of Robotic Assembly Operations

Göran Adamson, Magnus Holm, Lihui Wang, Philip Moore

The 13th Mechatronics Forum International Conference Proceedings: Vol. 1/3

2012. Konferensbidrag.

IEC 61499 - Enabling Control of Distributed Systems Beyond IEC 61131-3

Magnus Holm, Göran Adamson, Lihui Wang

Proceedings of the SPS12 conference 2012

2012. Konferensbidrag.

An IEC 61499 Function Block based Approach for CNC Machining Operations

Magnus Holm, Göran Adamson, Lihui Wang, Philip Moore

The 13th Mechatronics Forum International Conference Proceedings: Vol. 1/3

2012. Konferensbidrag.

Web based monitoring and control of distant Robotic Operations

Magnus Holm, Mohammad Givehchi, Abdullah Mohammed, Lihui Wang

Proceedings of the ASME 2012 International Manufacturing Science and Engineering Conference MSEC2012 June 4-8, 2012, Notre Dame, Indiana, USA

2012. Konferensbidrag. https://doi.org/10.1115/MSEC2012-7296

A review of function blocks for process planning and control of manufacturing equipment

Lihui Wang, Göran Adamson, Magnus Holm, Philip Moore

Journal of manufacturing systems

2012. Artikel, forskningsöversikt. https://doi.org/10.1016/j.jmsy.2012.02.004

Web-based Real-time Monitoring and Control of a Robot

Mohammad Givehchi, Magnus Holm, Göran Adamson, Lihui Wang

4th Swedish Production Symposium, SPS11, 3rd to 5th of May, 2011, Lund University

2011. Konferensbidrag.

Current Status of Function Blocks for Process Planning and Execution Control of Manufacturing Equipment

Lihui Wang, Göran Adamson, Magnus Holm, Philip Moore

Proceedings of the 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011: June 26 - 29th 2011, Feng Chia University, Taiwan

2011. Konferensbidrag.

A sensor-driven 3D model-based approach to remote real-time monitoring

Lihui Wang, Mohammad Givehchi, Göran Adamson, Magnus Holm

CIRP annals

2011. Artikel. https://doi.org/10.1016/j.cirp.2011.03.034

The Information Fusion JDL-U model as a reference model for Virtual Manufacturing

Leo J. De Vin, Magnus Holm, Amos H.C. Ng

Robotics and Computer-Integrated Manufacturing

2010. Artikel. https://doi.org/10.1016/j.rcim.2010.07.002

Embedding a process plan in function blocks for adaptive machining

Lihui Wang, Magnus Holm, Göran Adamson

CIRP annals